 |
"I've run this disc through every high-end receiver
I've had my hands on over the last year or so, and this was the best I've
heard it sound, hands down." Home Theater (Click
here to read the full review - Adobe Acrobat Reader required)
"Right out of the box, the Ultimate -Receiver pleasantly surprised
me with a warm, easy-going musicality that I still don't expect from receivers,
no matter how high-end they may be." Home Theater
"The back panel has a plethora of inputs which should be able to
handle almost anything you can throw at the Ultimate Receiver." Widescreen
Review
Bob Carver has always had a passion for making big power from a small
space. So what might you expect when he turned his attention to the receiver?
Best of breed, of course: The world's most powerful home theater receiver
in a package the size of a typical preamplifier.
Bob started with his highly-acclaimed Theater Grand Preamp/Processor and
then added seven channels of power amplification. This receiver can drive
speakers with impedances as low as four ohms, with 400 watts per channel
and with a warm and engaging soundstage.
The Ultimate Receiver decodes Dolby® Digital, Dolby® Digital EX,
Dolby® Pro Logic® II, DTS®, DTS-ES®, DTS Neo:6®, and
also features user-configurable all-speaker stereo and digital Sonic Holography®
Imaging.
The control system on the Ultimate Receiver can handle any kind of input
and feed it almost anywhere (including audio to a second room in your
home).
The Ultimate Receiver's remote is a powerful preprogrammed and learning
LCD-based design that is easy and intuitive for your family to operate.
For operation from custom controls systems, the Ultimate Receiver has
an RS-232 communication port and an IEEE-1394 (Firewire) port for
future expansion.
Like the Theater Grand IV, the Ultimate Receiver also includes an AM/FM
tuner with 40 presets, an eight-channel input for DVD-Audio or SACD®,
a Phono stage and a digital output that's active for all analog and digital
sources (including the the phono input!).
We urge you to audition an Ultimate Receiver at your local Sunfire Dealer.
Features and Specs
- Seven channels of Tracking Downconverter power amplification with
200 WATTS rms PER CHANNEL into eight ohms from 20Hz to 20kHz with no
more than 0.5% THD
- Two of the seven power amp channels can be configured (via on-screen-display
setup) to amplify the surround back, side-axis, or second zone channels
- Preamp outputs for all channels
- Auto signal sensing input switching - automatically turns the unit
on, selects your source and surround mode
- Bob Carver's Sonic Holography® Imaging for the ultimate soundstage
enhancement of two-channel sources
- 7.1 Channel Dolby Digital, Dolby Digital EX, DTS, DTS-ES, DTS Neo:6,
and Dolby Pro-Logic II decoding, plus Sunfire's exclusive Side-Axis
outputs for 9.1 channels total playback! (An additional stereo power
amplifier is required for all 9.1 channels)
- Second zone can play sources independent of the main zone
- Full-time digital downmix provides accurate two-channel output for
tape recording, digital outputs, and second zone from multichannel digital
sources
- User configurable nine channel 'PARTY' mode engages all speakers from
any two channel source
- Direct two-channel analog bypass mode
- Preprogrammed and learning remote control
- FM/AM tuner with 40 presets and Bob Carver's awesome Dynamic FM Noise
Reduction circuit which dramatically improves clarity of weak FM stations
- Three 100MHz+ HDTV compatible wide-bandwidth component video inputs
and two outputs
- Six audio/video inputs, each with audio, S-video and composite video
- Three audio-only inputs, including Moving Magnet Phono input for LPs
- Eight channel analog audio input using RCA connectors for DVD-A, SACD,
or other external multichannel source
- Digital audio (S/PDIF) inputs for six sources: four coax or optical,
plus two coax only
- Coaxial and optical digital (S/PDIF) outputs provide 2-channel digital
downmix from 5.1 sources or analog inputs like phono (record your vinyl
to CD-R!)
- Three subwoofer outputs
- Side-axis side speaker outputs for completely enveloping soundstage
(total of 9.1 channels!) Comprehensive all-digital bass manager with
crossover frequencies of 40 to 160Hz
- DSP tone controls
- 24-bit A-to-D converter and 24-bit/192kHz Multibit D-to-A converters
for the ultimate in sound quality
- Separate trigger outputs and infrared inputs for both zones
- High-current (500mA total) trigger outputs easily handle the most
power hungry accessories
- Sunfire exclusive: FLASH memory upgradable by playing a CD!
- IEEE-1394 (Firewire) port for future expansion
- Two-year parts and labor warranty
Owner's Manual
(Firewire is a trademark of Apple Computer, Inc.
All rights reserved.)
|